bwepngong

Leecher
This method works on about 60% new m028T with board serial L02C17XXXX-XXX. This method has been adopted due to unavailable firmware's to solve FBF error. Not all L02C17xxx gives such error and so users should take note.
It works greats on most 3g networks and some
You do not have permission to view link Log in or register now.
. However, there exist limitations in 4g/LTE BANDS


MORE ABOUT NTIM AND OBMI (boot files of DEVICE)

WARNING
You should know what you are up to; don't mess with file size during editing




MORE ABOUT FBF VERSION AND RELATED SOLUTION

NTIM and OBM
On bootup, the
You do not have permission to view link Log in or register now.
loads the OBM from storage memory to internal SRAM and hands control to it. The OBM reads the content of the Non-Trusted Image Module (NTIM) and searches for a DDR configuration package. If one exists, the OBM uses the information in the NTIM to configure the MCU. The NTIM can be customized for specific DDR devices by changing the register values. The sequence in which these registers are arranged in the NTIM description file is the same sequence in which these registers are programmed by OBM. The following is an example section of the NTIM Descriptor file that relates to DDR configuration.

NTIM binary can be generated from the NTIM description file using the latest WTPTP release package available on the Marvell extranet at:
My Products/Cellular & Handheld Solutions/Applications Processors/ARMADA 16x (ARMADA 16x - 88AP16X)/Software > WTPTP
Alternatively, an existing NTIM binary can be modified using a hex
You do not have permission to view link Log in or register now.
. Figure 3: "Example DDR Package within the NTIM Binary File" shows the DDR information in the NTIM binary. Starting at address 0x110 (in Figure 3) is a list of ID/value MCU
register pairs. For convenience, the registers IDs are shown on the right side of Figure 3.
Ensure the file size is not altered if editing the binary NTIM file.




CHECKS
• The dashboard must have 3g, 4g only, 4g/LTE and auto mode in other to function
• Dashboard with 4g only is likely NOT supported. I have tested on 4g only dashboards doesn’t seem to work
It works on L02C16XXX



WARNING
1. This method creates dashboard instability
2. Login data somehow not maintained and some users will have persistent login problems


SOLUTION
If wireless login problem persists; try login with USB cable; “admin” or default password and modify wireless settings manually

REQUIREMENTS
1. WTPTP DRIVERS
2. LTE GENERIC
You do not have permission to view link Log in or register now.
DRIVERS
3. MIFITOOL



GUIDE

1. Files Needed

View attachment 371

2. Install WTPTP Driver

View attachment 379

3. Install LTE Generic driver see tut here


4. Run Mifitool

View attachment 372

5.

View attachment 373

6.

View attachment 375

7.

View attachment 376

8.

View attachment 377

9.

View attachment 378

10.
Insert battery non-default sim card and battery, power on the device and insert USB cable

Log in to the dashboard using "admin" or default login password

Locate Network Mode and set to Auto

Network Displayed

Unlock Done

You do not have permission to view link Log in or register now.


You do not have permission to view link Log in or register now.


Credit to Droid Peeps and His team for this great Tut.
Extended, modified, and tested by
You do not have permission to view link Log in or register now.
Is it safe to try on l02c-m025t? Are the files compatible? Thanks in advance
 

ayejuedwin

Leecher
Pls, what is the latest firmware for this device and how can one get it to update mine(Smile NG Mifi). The one l have is L02CSmile1_M028A_LCD_NT_V006 Feb 23, 2017, is the date.
 

Important Notice


We do not support the downloaded files and how to run content

LIKE OUR FACEBOOK PAGE

Top